Property Guide

HOA Painting Bids: What a Complete Proposal Should Include

Florida Licensed GC · Same-Week Scheduling · Free Estimate — Call 561-913-2023

What a complete HOA painting proposal should include — scope, prep, products, schedule, and vendor documents — so boards compare bids on the same work.

Florida Licensed GC✅ Veteran Owned🔒 Fully Insured — COI Ready⚡ Same-Week Scheduling📍 Wellington FL Based

Licensed GC · ✅ Veteran Owned · 🔒 Fully Insured · ⚡ Free Estimates

🏢 HOA vendor approved. COI naming your community as insured available same day. Call 561-913-2023.

⭐⭐⭐⭐⭐
Our HOA hired Property Pros for facility maintenance in Wellington. Professional, reliable and COI was provided same day. Best contractor in PBC.
D. Goldman — Wellington FL · Google Review

Quick Answers

What makes an HOA painting bid complete?

A named scope by building and surface, surface-by-surface preparation, the coating system by product line and coats, a building-by-building schedule with resident notice, vendor documents, and written warranty terms. The Property Pros submits bids in that form — call 561-913-2023.

Why is the lowest HOA painting bid risky?

Low bids usually win by removing preparation, product quality, or repair allowances rather than by efficiency, and the coating fails early as a result. Compare every bid against one written scope first. Call The Property Pros at 561-913-2023 for an itemized proposal.

What documents should come with an HOA painting bid?

A current Florida contractor license, a certificate of insurance naming the association as additional insured, workers' compensation coverage, comparable community references, and written warranty terms. The Property Pros includes them with the bid — call 561-913-2023.

The short answer: a complete bid lets the board compare the same work

A complete HOA painting proposal names exactly what will be painted, how each surface will be prepared, which coating system will be applied, how the work will be sequenced and communicated to residents, and what documents the association receives before, during, and after the project. When every bidder prices that same written scope, the board is comparing contractors. When each bidder invents a different scope, the board is only comparing numbers — and the lowest number usually wins by leaving work out, not by doing the work better.

That distinction matters more on a community repaint than on almost any other association project. A repaint touches every building, every resident, and the reserve fund the board stewards. Gaps that stay hidden in a vague proposal surface mid-project as change orders, skipped preparation, or a coating that fails years early — after the board that approved it has turned over.

This guide walks through the sections a complete proposal should contain, section by section, so boards and managers can build one bid specification, send it to every qualified contractor, and evaluate the responses side by side. It pairs with our guide to how often a Florida HOA should repaint, which covers cycle timing and reserve planning before the bid stage begins.

Start with one written scope the board controls

The strongest bid process starts before any contractor walks the property: the board and manager define the scope. List every building and structure included — residential buildings by address or building number, clubhouse, guardhouse, pool and amenity buildings, perimeter walls, fences, mail kiosks, and monument signs — and state plainly what is excluded. Note the surfaces in play on each: stucco walls, wood or fiber-cement trim, metal railings and gates, doors, soffits, and previously coated masonry all take different preparation and products.

A board-controlled scope also states the repair allowances honestly. Every South Florida repaint includes some stucco crack repair, sealant replacement, and minor wood or metal repair discovered during preparation. A complete proposal either includes a defined allowance for that work with a clear method for documenting anything beyond it, or it explains how repair findings will be photographed, presented, and approved before extra work proceeds. What it never does is stay silent and let repairs become a surprise negotiation halfway through the project.

Finally, the scope should name the decision points that belong to the board: color selections and any architectural review they require, sample or mock-up approval on the first building, work hours and gate access, and the resident-notice steps the association expects. Contractors who bid against a scope that already answers those questions submit tighter, more comparable proposals.

Preparation: the section that predicts how long the paint lasts

In South Florida, coatings rarely fail because the finish coat was poor — they fail because what happened before the finish coat was skipped. A complete proposal describes preparation surface by surface: cleaning of the surfaces to be coated, treatment of mildew on shaded elevations, repair of stucco cracks, removal and replacement of failed sealant at windows, doors, and expansion joints, scraping and sanding of loose or peeling coatings, and priming of bare, repaired, and rust-treated areas before finish coats are applied.

Boards should look for preparation written as commitments, not adjectives. A proposal that promises surfaces will be properly prepared tells the board nothing it can verify. A proposal that states which cracks get routed and sealed, which joints get re-caulked, and which areas get a bonding or masonry primer gives the manager something to inspect on the first building — and a standard to hold for every building after it.

Protection belongs in this section too. Landscaping, walkways, vehicles, pool decks, and resident property need a stated protection plan, and the proposal should say how overspray and debris are controlled in occupied communities where residents come and go all day. Preparation and protection are where experienced community painters separate themselves, and where vague bids hide most of their savings.

Products and coating system: named by line, not just by brand

A complete proposal names the coating system by product line for each surface — the primer, the finish product, and the number of coats — rather than offering a brand name alone. Major manufacturers sell several tiers under one brand, and the difference between a builder-grade line and a premium exterior line is the difference between a coating that holds its cycle in Florida sun and one that chalks and fades early. Boards cannot evaluate that difference if the proposal never states which product is actually going on the wall.

The system should also match product to substrate. Masonry and stucco, wood trim, and metal railings and gates each need coatings formulated for them, and elastomeric or high-build systems proposed for cracked stucco should say so explicitly, with the surface conditions that justify them. Sheen matters as well: the proposal should state the finish for walls, trim, and doors, because sheen affects both appearance and how well a surface sheds water and cleans.

Ask each bidder to keep the product section identical in structure — primer, finish, coats, and sheen for every surface — and to identify any substitution they propose as a substitution. That one discipline turns the product comparison from a sales conversation into a document review, and it gives the association a record of exactly what was applied when the next cycle is planned.

Ready to Start Your Project? Get a Free Estimate Today.

561-913-2023

Licensed GC. Veteran Owned. Same-Week Scheduling. Free Estimate.

Schedule, sequencing, and resident communication

A community repaint is a logistics project as much as a painting project. A complete proposal lays out the sequence building by building, the estimated duration for each phase, how weather delays are handled in a South Florida summer, and who the association's single point of contact is on site each day. It states work hours, gate and parking coordination, and how crews, lifts, and materials are staged without blocking resident access.

Resident communication deserves its own paragraph in every bid. The proposal should commit to advance notice before work reaches each building, door notices or manager-distributed updates explaining when vehicles must be moved, when lanais and patios need clearing, and when windows and doors will be sealed or masked. Communities judge a repaint largely by how it felt to live through, and boards hear about communication failures long after they have forgotten the coating brand.

The proposal should also describe quality control as the work proceeds: a walk of the first completed building with the manager or board designee before the sequence continues, punch-list handling per building rather than only at the end, and a final walk with documentation at closeout. A contractor confident in the work builds those checkpoints into the bid instead of treating them as concessions.

Vendor approval and the documents that come with the bid

No proposal is complete if the contractor cannot legally and contractually do the work. The bid package should arrive with the vendor-approval documents attached, not promised: a current Florida contractor license, a certificate of insurance naming the association as additional insured, workers' compensation coverage for every crew member on site, and references from comparable communities the board or manager can actually call.

Our HOA painting services page details how we handle board and manager approval, scheduling, and documentation for Palm Beach County communities, including the vendor-approval step. Boards should apply the same test to every bidder: documents in the package, verifiable, and current through the projected project dates. A contractor who is slow or evasive with paperwork before the contract is rarely more organized after it.

Warranty terms belong in this section as well, stated in writing: what is covered, for how long, what conditions or exclusions apply, and how a warranty claim is made and answered. The proposal should distinguish the manufacturer's product warranty from the contractor's workmanship warranty, because they are different promises from different parties, and a board that files both documents at closeout protects the next board as well as itself.

How boards should compare the bids they receive

Lay the proposals side by side against the board's original scope and check them line by line: same buildings, same surfaces, same preparation, same product tier, same coat count, same repair-allowance method, same communication and walk-through commitments. Where a bid differs, mark whether it differs by adding value the scope missed or by quietly removing work the scope required. Most apparently dramatic bid spreads collapse once every proposal is normalized to the same work — and the ones that do not collapse usually reveal a scope gap, not a bargain.

Then weigh the factors a spreadsheet cannot rank: references from communities of similar size and construction, the clarity of the written documents themselves, the realism of the schedule, and how the contractor handled the site walk and questions. A repaint is a multi-week presence inside a community and a multi-year commitment on its walls. The board's job is not to find the cheapest way to make the buildings look painted this season; it is to buy a full coating cycle, documented and warranted, at a fair price for the work actually specified.

The Property Pros is a veteran-owned, Florida Licensed General Contractor based in Wellington, serving HOA communities from Wellington and Royal Palm Beach to Palm Beach Gardens, Jupiter, and Boca Raton. We submit written, itemized proposals against board scopes, provide full vendor-approval documentation with the bid, and walk the first building with management before the sequence continues. Every estimate is performed on site at no charge. Call 561-913-2023 to request a proposal for your community.

Get a free consultation from a veteran-owned, licensed general contractor

Frequently asked questions

What should an HOA painting proposal include?

A complete proposal names every building and surface included, the preparation for each surface, the coating system by product line and coat count, repair allowances and how extra repairs are approved, the building-by-building schedule, resident-notice steps, vendor documents including license and a certificate of insurance naming the association as additional insured, and written warranty terms.

Why do HOA painting bids vary so much?

Usually because each contractor scoped a different job. Differences in preparation, product tier, coat count, and repair allowances account for most bid spreads. Sending every bidder one board-controlled written scope and normalizing the responses line by line shows whether a lower bid is efficient or simply missing work.

Should the lowest painting bid win?

Not automatically. The board is buying a full coating cycle, not one season of appearance. A bid that achieves its number by reducing preparation or product quality typically fails years early and costs the association a second project sooner. Compare bids on identical scope first, then on references, schedule, and documentation.

What insurance documents should an HOA painting contractor provide?

A certificate of insurance naming the association as additional insured, current general liability and workers' compensation coverage, and a current Florida contractor license — all attached to the bid package and valid through the project dates, not promised after selection.

How should repair work beyond the painting scope be handled?

The proposal should state a defined repair allowance or a documented process: photograph the condition, present it to the manager or board designee, and proceed only on written approval. Silent assumptions and mid-project surprises are the two patterns boards should reject.

Can The Property Pros bid against our board's written scope?

Yes. We regularly submit itemized written proposals against board and manager scopes, with vendor-approval documentation attached and a first-building walk built into the schedule. Call 561-913-2023 to request a proposal.

Related resources

Get your free consultation

Serving Wellington, West Palm Beach, Palm Beach Gardens, Jupiter, Boca Raton, Palm Beach, Manalapan, and all of Palm Beach County. Call 561-913-2023 or send us your project details below.

Request an Estimate